The HiKOKI 36V Multivolt Kit 2 Piece Drill Driver Set includes the DV36DA 36V Brushless Impact (Hammer) Driver Drill, the WH36DC 36V Brushless 1/4" Impact Driver, 2 x BSL36A18 Li-ion MultiVolt Batteries, a UC18YSL3 Rapid Charger with cooling & USB port and a stackable case
Technical Specifications:
- Capacity
o Masonry: 20mm
o Wood: 102mm
o Steel: 16mm
- No load speed: 0 - 500 / 0 - 2,100 (min-1)
- No load impact rate: 0 - 31,500 (min-1)
- Max. torque:
o Hard: 138Nm
o Soft: 64Nm
- Weight: 2 kg (without battery)
- Length: 204mm
Technical Specifications - WH36DC 36V Brushless 1/4" Impact Driver
- Capacity:
o Small screw: 4 to 10 mm (5/32" to 3/8")
o Ordinary bolt: 5 to 18 mm (3/16'' to 23/32'')
o High tension bolt: 5 to 14 mm (3/16'' to 9/16'')
o Self drilling screw: 3.5 to 6 mm (1/8" to 1/4") in diameter
- Tightening torque:
o Power mode: 215 Nm
o Bolt mode: 215 Nm
o Soft mode: 76 Nm
- No-load speed (with a battery fully charged at 20°C)
o Power mode: 0 to 3,400 min-
o Bolt mode: 0 to 2,900 min-
o Bolt single mode: 0 to 2,900 min-
o Soft mode: 0 to 900 min-
o Self-drilling screw mode: 0 to 3,700 min-
- Impact rate (with a battery fully charged at 20°C)
o Power mode: 0 to 4,100 min-
o Bolt mode: 0 to 4,100 min-
o Bolt single mode: 0 to 4,100 min-
o Soft mode: 0 to 2,000 min-
o Self drilling screw mode: 0 to 2,200 min-
- Drive: 6.35 mm (1/4”) bit holder
- Type of switch: Variable speed trigger switch with forward/reverse changeover lever
- LED light: White LED (Always ON, Light only SW-ON, and Always OFF)
- Weight: 1.6 kg