-
- The 40V Max Brushless Hammer Driver Drill Kit has been designed for continuous heavy duty application, providing heavy duty power with 141Nm max. torque.
- The ideal combination of power and speed with drilling speeds up to 35% faster then the equivalent 18V model.
- The improved performance allows for massive drilling capacities with up to 152mm hole saw and 50mm auger bit capacity.
- For advanced safety the HP001G is equipped with Active Feedback Sensors automatically shutting down the tool in the event of a kickback.
- The redesigned electronic clutch allows selection from 41 torque range settings for precise fastening in a variety of applications.
- 2x 4.0Ah Batteries (BL4040)
- Rapid Charger (DC40RA)
- MakPac Type 2
- BONUS: 18V Battery Adaptor for XGT Charger (ADP10)
Makita HP001GZ 40V Max Li-ion Cordless Brushless Hammer Driver Drill- Skin Only
- Heavy duty power with 141Nm peak torque
- Active feedback sensors shut down the tool in the event of a kickback
- Massive drilling capacity with 152mm hole saw & 50mm auger bit capacity
- 35% faster drilling speed compared with the equivalent 18V model
- Electronic clutch for selecting between 41 torque range settings
Specifications:
- Voltage: 40V Max
- Max. drilling capacities in masonry: 20mm
- Max. drilling capacities in steel: 20mm
- Max. drilling capacities in wood: Auger bit: 50mm, Self-feeding bit: 76mm, Hole saw: 152mm
- Max. lock torque .125Nm
- Max. peak torque: 141Nm
- Impact Rate: Max.Hi: 0 - 39,000ipm / Lo: 0 - 9,750ipm
- Max. Tightening Torque: Max.: Hard: 140Nm / Soft: 68Nm
- No Load Speed: Hi: 0 - 2,600rpm / Lo: 0 - 650rpm
- Length: 182mm
- Weight (with battery): 3kg (BL4040)
Warranty: 5 Years Warranty with Registration covered by Makita Australia
2 x Makita BL4040 40V Max 4.0Ah Li-ion XGT Cordless Batteries with Gauge
Features
- Digital communication between the tool & battery for optimised performance
- Heavy duty cell casing significantly improves the batteries impact resistance
- Battery ventilation system maximises battery life
- Short circuit prevention structure protects terminals from dust and moisture
- 3-layer moisture protection shields cells from water ingress
Specifications:
- Voltage: 40V Max
- Capacity: 4.0Ah
- Energy Capacity: 144Wh
- Battery Type: Lithium-Ion
- Charging time: 45min
- Weight: 1kg
Warranty: 2 Years Warranty Covered By Makita Australia
Makita DC40RA 40V Max XGT Single Port Rapid Charger
Features
- Rapid charging system communicates data between battery and charger for optimum charging
- Equipped with dual cooling fans, cooling the battery & charging circuit for rapid charging
- Compatible with ADP10 adaptor (optional accessory) for charging 18V LXT batteries
- Large charging status indicator light & selectable full charge melody
Specifications:
- Voltage: 40V Max
- Charging time:
- BL4040: 45min
- BL4025: 28min
- BL1860B using APD10: 40min
- Weight: 1kg
Warranty: 2 Years Warranty Covered By Makita Australia
Makita 197051-3 Makpac Connector Carry Case System - Type 2
The Makita MAKPAC connector case system designed for the professional. Strong and collapsible carry handles make the connector cases easy to move and store. Rounded grips make it easy to remove the individual cases. The MAKPAC connector case system consists of four cases varying in height. The cases can be stacked on top of each other and locked together with the locking latches. The interconnected cases take up less storage space and are easy to transport to and from the work site.
Features:
- Stackable for storage and easy transportation
- Strong and collapsible handles
- Four different sizes to choose from
Specifications:
- Type: 2
- Dimensions (L x W x H): 395mm x 295mm x 157mm
- Weight: 1.6kg