Aftermarket Draper belt to suit John deere 600 & 700 series cutting platforms. Manufactured by WCCO in the USA, this draper feed belt measures 39.54" wide, with straight cleats and has a side V guide.

*Pre-Cut length suppliued without joiner

WCCO’s patented RAPTOR™ Belting uses 100% polyester filament fabric with a friction coating capability with higher tensile, tear, and puncture resistance. RAPTOR™ draper belting has higher strength properties, superior durability and also features an innovative teardrop-shaped fiberglass reinforcement rod inside of the cleat for increased stiffness, making it more significantly stiffer in the cross direction than its competition.

Part numbers

• 1009218, AXE16051

Fitment

• John Deere - 625D, 630D, 635D, 640D, 725D, 730D, 735D, 740D

Features

• Pre-cut 12'Side V guide
• USA made WCCO Raptor
• strength and reliability

Model Belt Length

Model Fitment	Left Hand Exact length	Left Hand Cut Length	Right Hand Exact length	Right Hand Cut Length
John Deere 625D	237.13"	20 Ft	237.13"	20 Ft
John Deere 630D	297.13"	25 Ft	297.13"	25 Ft
John Deere 635D	357.13"	30 Ft	357.13"	30 Ft
John Deere 640D	417.13"	35 Ft	417.13"	35 Ft
John Deere 725D	237.13"	20 Ft	237.13"	20 Ft
John Deere 730D	297.13"	25 Ft	297.13"	25 Ft
John Deere 735D	357.13"	30 Ft	357.13"	30 Ft
John Deere 740D	417.13"	35 Ft	417.13"	35 Ft

101912 174230 145962 113939 1008789 1008948