Long-Life hardfacing 'MIG' wire for ground-engaging equipment.
Very high resistance to abrasion with up to 3-4 times better wear life vs basic hardfacing wires
* to special carbide additives not found in other wires.
Recommended for metal-to-earth applications where wear is mostly caused by abrasion, with low-to-medium impact points, tynes, buckets, teeth, screws, augers, grousers, etc.
Gasless wire for easy application.
Available in 1.2mm in 4.5kg spools.
Requires minimum 140 amps, suitable for use with 200A-250A MIG welders.
Features:
- High-performance, offering exceptional wear life
- Very high abrasion resistance, offering a wear multiple of ~600% vs mild steel
- Light-to-medium impact resistance
- Gasless flux-cored wire
Applications:
- Typical hardness 59-61 HRc (max hardness achieved with 2 layers)
- Ideal for ground-engaging agricultural and earthmoving tools subject to high abrasion and low-to-moderate impact
*Approx, as per ASTM G65 standard