New Holland® Compatible

Feeder House Chains Only Set - Chrome Pin

WITH DYNAMIC FEED ROLL

C&M replacement feeder house chains only set to suit the front feeder house on New Holland® CR series combine harvesters supplied with a 4 chain feeder house and dynamic feed roll. This is a set of four (4) replacement chains with the same spacing and attachment holes as the original New Holland® chain.

You can re-chain your assembly using the original New Holland® serrated slats. This chains only set is supplied with threaded connectors and half links for each strand. We supply these chains in Australia from premiuum grade chrome pin chain. We guarantee the quality of these unit, however we recommend you fit new sprockets at the time of installation. 

* This 'chains-only-set' accepts 33 bars as used on combines fitted with the dynamic feed roll.

Part Numbers	LOCATION FROM OPERATORS SEAT	QTY INCLUDED
84527478	RIGHT HAND	1
84527476	CENTER	2
84527479	LEFT HAND	1

Series	Models	Serial/Year
New Holland® CR8.	CR8.80 CR8.90	With DFR
New Holland® CR9.	CR9.80 CR9.90	With DFR
New Holland® CR90	CR9070 CR9080 CR9090	With DFR
New Holland® CR10.	CR10.90	With DFR

Features

• Fits Feeder House where DFR is installed
• Premium grade chain
• Threaded connectors x 4
• Threaded half links x 8
• Fasteners not included
• Center stamped pins
• Solid bushings
• Chrome Pins

C&M Technical Specifications

Item	Details	Notes
CM064OEMCOCP	New Holland® CR Series	With DFR
Chain Brand	AMEC	Stamped C&M
Chain Type	A557	Chrome Pin
Chain Assembly	4 Chains set	No bars
Attachment Pattern	8-6/2-6/2-8	Same as Case-IH OEM
Number of Pitches	88	Including Connectors
Supplied Connectors	4 x Conns 8 x Offset Links	Threaded
Assembly Width (Overall)
Number of bars	33	Bars not included
Chain centre to centre	NA
Bar Type	6mm U-Bar G350	Not included
Bolts	132 x M10X25 Class 10.9	Not included
Nuts	132 x M10 Cone lock	Not included

Build Sheet

48103501 84527478 84527479 84527476

Product Warranty

The Collier & Miller warranty complies with the Australian Consumer law, this warranty and does not limit or replace your right Australian Consumer Guarantee. Collier & Miller warrant that it will repair or replace (whichever it deems advisable) any product manufactured or imported by Collier & Miller which proves to be defective in material or workmanship within a period on one (1) year from the date of the original purchase on the invoice. This warranty is in lieu of all other warranties (except those of title), expressed or implied, and there are no warranties of fitness for the particular purpose. 

Conditions

1. The warranty covers normal use and does not cover damage or defect which is the result of alteration, accident , neglect, improper installation, operation or maintanance.
2. In no event shall Collier & Miller be liable for downtime expenses, loss of machine use, loss of crops, loss of profits, injury or damage arising from accident, direct or indirect loss, or other incidental, consequential or special damages.
3. Collier & Miller neither assumes or authorizes any other person to give any warranty or to assume any other obligation on its behalf

FEEDER HOUSE CHAINS ARE SUBJECT TO VARIABLE CONDITIONS. THESE INCLUDE FITMENT, SPROCKET CONDITION AND OPERATIONAL CONDITIONS. EACH CHAIN MUST BE FITTED TO EQUIPMENT THEY WERE DESIGNED FOR, FITTED WITH NEW SPROCKETS AND INSTALLED BY A SUITABLY QUALIFIED PERSON. WEAR OF CHAIN OR FAILURE DUE TO FOREIGN OBLECTS IS NOT COVERED BY WARRANTY.

Process

In the event of a defect which may result in a warranty claim:

1. The Owner must provide the Collier & Miller with written notice of the defect within 14 days of its occurrence, and allow reasonable time for replacement or repair. 
2. At Collier & Miller’s request, the owner will ensure any failed parts are freighted to the Collier & Miller or other location advised by an authorised representative.
3. The Warranty is not transferable to any third party or subsequent purchaser.