C&M aftermarket centre feed drive roller repair hub to suit Macdon and CNH cutting platforms fitted with CA20, CA25 or FM100 combine/float adaptor. This centre feed drive roller repair hub is designed to allow you to repair your existing drive roller where the splined bush has been stripped out.
The repair hub contains the splined bush and vee-groove, the idea is you part off the old hub to the length required, machine the roller to accept the new hub and weld it together.
Part numbers
- Macdon 133891
- Case 87627760 (SN Break) After Y7ZN00301
Application
- Combine adaptor center feed drive roller
Models
| Series |
Models |
Serial/Year |
| Macdon Combine Adaptors |
CA20 |
2012 AND LATER |
|
CA25 |
All with Splned Hub |
| Macdon D Series |
D50, D60, FD70 |
2012 and later with CA20 with Splned Hub |
|
D65, FD75 |
All with Splned Hub |
|
D1, FD1 |
All with Splned Hub (FM100 Float Module) |
| Case 21 Series |
2142, 2152, 2162 |
(SN Break) After Y7ZN00301 |
| New Holland |
82C, 83C, 86C |
All with Splned Hub |
Features
- C&M Australian Made
- 1" x Z6 Spline Hub
- V-Groove