CASE-IH® Compatible
250 Series Feeder House Sprocket
C&M aftermarket feeder house sprocket to fit CASE-IH® 250 Series combine harvesters. This is an Australian made feeder house sprocket which fits the feeder house on CASE-IH® 250 series (7250, 8250, 9250) combine harvesters. This assembly is machined to accept the CASE-IH® feeder gearbox flange as supplied with the original sprocket.
Manufactured as a single piece tube assembly it is supplied with 4 x 15 Tooth sprockets machined from grade 1045 steel, welded to a central tube and fitted with a female hub one end and threaded on the other. The sprocket will fit existing Case-IH® combine harvesters as the female hub will accept the OEM Case-IH® gearbox flange. All components are Australian made with machining being done in our factory.
Part Numbers
Series |
Models |
Serial/Year/Part# |
Case 250 Series |
7250, 8250, 9250 |
non-clutched |
Features
- C&M Made In Australia
- Sprocket supplied ready to accept 48150111 Hub
- Special heavy wall seamless tube to cope with high radial loading
- Special design tooth relief
- Grade 1045 sprocket material
- Powdercoat black finish
THE SUPPLIED SPROCKET IS MANUFACTURED TO ACCEPT YOUR EXISTING GEARBOX FLANGE. YOU WILL BE REQUIRED TO RE-USE THESE CASE-IH® COMPONENTS:
- 48150111 Gearbox Flange
- 48150115 Plug
- 11061575 Locking Ring
- 48150120 Hub
- 48127083 Shaft