Case-IH® Macdon® & New Holland® compatible
Replacement nitride hardened drive spline hub
C&M made in Australia aftermarket centre feed drive roller repair hub to fit Case-IH®, Macdon® and New Holland® cutting platforms fitted with CA20, CA25 or FM100 combine/float adaptor. This centre feed drive roller repair hub is designed to allow you to repair your existing drive roller where the splined bush has been stripped out.
The repair hub is fully nitride hardened and contains the splined bush and vee-groove, the idea is you part off the old hub to the length required, machine the roller to accept the new hub and weld it together.
Part numbers
- Macdon 133891
- Case 87627760 (SN Break) After Y7ZN00301
| Series |
Models |
Serial/Year |
| Macdon® Combine Adaptors |
CA20 |
2012 AND LATER |
|
CA25 |
All with Splned Hub |
| Macdon® D Series |
D50, D60, FD70 |
2012 and later with CA20 with Splned Hub |
|
D65, FD75 |
All with Splned Hub |
|
D1, FD1 |
All with Splned Hub (FM100 Float Module) |
| Case-IH® 21 Series |
2142, 2152, 2162 |
(SN Break) After Y7ZN00301 |
| New Holland® |
82C, 83C, 86C |
All with Splned Hub |
Features
- C&M Australian Made
- Complete assembly is nitride hardened (including spline)
- 1" x Z6 Spline Hub
- V-Groove