CASE-IH® Compatible

Feeder House Chains Only Set - Chrome Pin

NON ROCK TRAP

C&M replacement feeder house chains only set to fit the front feeder house on CASE-IH® Flagship combine harvesters. This is a set of four (4) replacement chains with the same spacing and attachment holes as the Case-IH® original chain.

You can re-chain your assembly using the original Case-IH® serrated slats. This chains only set is supplied with threaded connectors and half links for each strand. We supply these chains in Australia from premium grade chrome pin chain. We warranty the quality of these unit, however we recommend you fit a new sprocket at the time of installation.

Part Numbers

• 84179642 84222952

Series	Models	Serial/Year
Case-IH® 120 Series	7120, 8120, 9120
Case-IH® 230 Series	7230, 8230, 9230
Case-IH® 240 Series	7240, 8240, 9240	240 Series MY18 onwards may be fitted with feederhouse chains featuring cast bars and A960H chain. CM031OEMCOCP

Features

• C&M quality product
• Fits Feeder House without Rock-Trap
• Premium grade chrome pin chain
• C&M Brand Stamped
• Threaded connectors included (x4)
• Threaded offset links Included (x8)
• Fasteners not included

C&M Technical Specifications

Item	Details	Notes
CM039OEMCOCP	Case-IH® Flagship	With Rock Trap
Chain Brand	AMEC	Stamped C&M
Chain Type	A557	Chrome Pin
Chain Assembly	4 Chain	Bars and Bolts not included
Attachment Pattern	8-6/2-6/2-8	Same as Case-IH OEM
Number of Pitches	114	Including Connectors
Supplied Connectors	4 x Conns 8 x Offset Links	Threaded
Assembly Width (Overall)	NA
Number of bars	36	Bars not included
Chain centre to centre	NA
Bar Type	NA
Bolts	168 x M10X25 Class 10.9	Not included
Nuts	168 x M10 Cone lock	Not included

Build Sheet

Warranty Policy

Collier & Miller’s warranty complies with the Australian Consumer law, this warranty and does not limit or replace your right Australian Consumer Guarantee. Collier & Miller warrants to the purchaser, that each material and workmanship for 12 months after delivery and installation.

This warranty is in lieu of all other warranties (except those of title), expressed or implied, and there are no warranties of fitness for the particular purpose. In no event shall Collier & Miller be liable for downtime expenses, loss of machine use, loss of crops, loss of profits, injury or damage arising from accident, direct or indirect loss, or other incidental, consequential or special damages.

Conditions of warranty

FEEDER HOUSE CHAINS ARE SUBJECT TO VARIABLE CONDITIONS. THESE INCLUDE FITMENT, SPROCKET CONDITION AND OPERATIONAL CONDITIONS. EACH CHAIN MUST BE FITTED TO EQUIPMENT THEY WERE DESIGNED FOR AND FITTED WITH NEW SPROCKETS. WEAR OF CHAIN OR FAILURE DUE TO FOREIGN OBLECTS IS NOT COVERED BY WARRANTY.

Process

In the event of a defect which may result in a warranty claim:

1. The Owner must provide the Collier & Miller with written notice of the defect within 14 days of its occurrence, and allow reasonable time for replacement or repair. 
2. At Collier & Miller’s request, the owner will ensure any failed parts are freighted to the Collier & Miller or other location advised by an authorised representative.
3. The Warranty is not transferable to any third party or subsequent purchaser.