CASE-IH® Compatible Flagship 120, 230 & 240 Series Feeder House Sprocket Kit
Keep your
product feeding system in top condition with this comprehensive Australian-made feeder house sprocket rebuild kit. Specifically engineered for Case IH® 120, 230, and 240 series flagship combines, this kit includes the essential bearings and seals required for a professional installation.
This C&M aftermarket kit features a single-piece tube assembly with four 15-tooth sprockets machined from high-grade 1045 steel. To ensure an extended service life under high radial loads, the assembly includes a nitride-hardened splined hub matched to OEM dimensions. Replacing these components as a complete kit ensures your intake system remains in premium working order and prevents premature wear caused by old bearings or leaking seals.
* Note: This sprocket is designed for machines without a rock-trap. It does not include a radial pin clutch and is not recommended for use where rocks are present.
Flagship Series Model Compatibility
Replaces OEM Part Numbers: 87673520 (Non Rock-Trap) | 84414906, 84296465, 84414915 (Rock-Trap Cross Ref)
Feeder House Sprocket Kit for Case IH 7120, 8120, 7230, 8230, 8240, 9240 Models
| Series |
Models |
Part Reference |
| Case-IH® 120 Series |
7120, 8120, 9120 |
86773520 (No Rock Trap) |
| Case-IH® 230 Series |
7230, 8230, 9230 |
84414906 (No Rock Trap) |
| Case-IH® 240 Series |
7240, 8240, 9240 |
84414906 (No Rock Trap) |
Parts Supplied in Kit
| Component Description |
OEM Part No. |
C&M Part No. |
| Complete 15-Tooth Sprocket Assembly |
84296465 |
WI89 |
| RH Side Feeder Sprocket Bearing |
86995212 |
1108KRRB |
| Gearbox Feed Conveyor Shaft |
87282003 |
CM87282003 |
| Conveyor Shaft Bearing (Double Sealed) |
301164 |
6208DDUC3 |
| Conveyor Shaft Oil Seal (40x80) |
87612665 |
M40X80 |
Technical Specifications & Features
- Full Rebuild Kit: Includes sprocket, grease nipple, wiper seal, bearing, and oil seal.
- Quality Assurance: Australian designed and manufactured to keep your equipment in top condition.
- Hub Construction: Nitride-hardened, greasable splined hub for superior wear resistance.
- Sprocket Material: Grade 1045 steel 15-tooth sprockets for extended service life.
- Tube Design: Heavy-wall seamless tubing engineered for high radial loading.
- Available for fast Australia-wide dispatch from Collier & Miller.
|
IMPORTANT SERVICE LIFE INFORMATION: Accurate gearbox output shaft alignment performed in accordance with CNH recommendations is essential for optimum service life.
Damage or wear of the splined bush and shaft is directly associated with incorrect alignment during installation. Wear resulting from alignment issues is considered an operational matter and is not covered by warranty.
|
Consumer Guarantee
In accordance with the Australian Consumer Law (ACL), Collier & Miller guarantees that, at the time of delivery, the purchased machine/ unit will be of acceptable and high quality. This includes being free from defects in all parts and components, having no hidden workmanship errors, and being safe for use. The machine/ unit will also be capable of performing any application for which it was designed and specified, and it will match the description provided at the time of purchase.
If the machine/ unit fails to meet this guarantee, Collier & Miller will take all necessary steps to remedy or repair the issue within a reasonable timeframe and at no cost to the customer.
Collier & Miller will also take reasonable steps to source or provide spare parts and repair facilities for the machine/ unit for a reasonable period after purchase.
Manufacturer’s Warranty
Collier & Miller provides this warranty in compliance with the Australian Consumer Law. This warranty offers additional benefits and does not limit or replace your rights under the Australian Consumer Guarantee.
All components of new Collier & Miller machinery are covered under a 12-month warranty from the date of delivery to the customer. Under this warranty, Collier & Miller will repair or replace any defective part or component, including any workmanship errors. Any replacement parts or components will carry a warranty period equal to the remainder of the original machine/ unit’s warranty.
If a part or component is faulty or defective, stop using the machine/ unit immediately and contact Collier & Miller as soon as practically possible.
For warranty claims, Collier & Miller can be contacted via:
Once the claim is assessed and accepted, the customer will be notified within a reasonable timeframe regarding the next steps.If a part or component requires replacement, Collier & Miller will arrange and cover the cost of sending the replacement to the customer within a reasonable timeframe. If a part or component requires repairs, the customer is responsible for returning it to Collier & Miller at their own cost. Once the repair is complete, Collier & Miller will cover the cost of returning the repaired part to the customer.
Sites for reference;
Conditions of warranty
| SPROCKET DRIVE SPLINE AND HUB SERVICE LIFE IS DIRECTLY AFFECTED BY INSTALLATION. ACCURATE GEARBOX OUTPUT SHAFT ALIGNMENT PERFORMED IN ACCORDANCE WITH CNH RECOMMENDATIONS WILL ENSURE OPTIMUM SERVICE LIFE. WEAR OF THE SPLINED HUB AND SHAFT IS DIRECTLY ASSOCIATED WITH THE MISALIGNMENT OF THE GEARBOX AND FEEDER CHAIN TOP SPROCKET DURING INSTALLATION AND/OR OPERATION. ANY WEAR ASSOCIATED WITH THESE PARTS WILL BE CONSIDERED NORMAL WEAR, TEAR OR AN INSTALLATION/OPERATION ISSUE AND WILL NOT BE COVERED BY WARRANTY. |